Aerosol MSDS

MATERIAL SAFTY DATA SHEET CLEARNEON AEROSOL

SECTION 1 – CHEMICAL SUBSTANCE/PRODUCT AND COMPANY

IDENTIFICATION

Product Name:

ClearNeon Workable Art Fixative

Company Identification:

ClearNeon Inc.

7337 W. 33rd Street North

Wichita, KS 67212

1-316-722-5825

In case of medical emergencies, please contact your local poison control center.

Transportation emergency (24 hour), contact:

Dan Dopps – Phone # 1-316-393-7691 (US)

Date: January 2002 Updated: 2012

SECTION 2 – HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW:

This is a consumer commodity art fixative that is safe for consumers and others users under intended and reasonably foreseeable use. Additional information on toxicological endpoints is available from the supplier upon request.

POTENTIAL HEALTH EFFECTS:

EYE:

Contact may cause mild, transient irritation. Some redness and/or stinging may occur.

SKIN:

Not expected to be irritating, sensitizing, photoallergenic or phototoxic when used as intended. May cause freeze burn to skin if directly sprayed in close proximity to one spot without moving. If irritation occurs following intended use or prolonged contact it is expected to be mild and transient.

INHALATION:

May cause mild, transient respiratory irritation. Avoid prolonged contact to concentrated vapors.

INGESTION:

Product used as intended is not expected to cause gastrointestinal irritation. Accidental ingestion of undiluted product may cause mild gastrointestinal irritation with nausea, vomiting, and diarrhea.

SECTION 3 – COMPOSITION AND INGREDIENTS

Complete ingredient list is:

Dimethyl Ether, Water Acrylates Copolymer, Fragrance.

Hazardous Ingredients as defined by OSHA, 29 CFR 1910.1200 and/or WHMIS under the HPA:

Chemical Name

Common Name

CAS No.

Composition Range

LD50/LC50

Methoxymethane

Dimethyl Ether

115-10-6

70 -85 %

LD50 = No data available

LC50 = 368 g/m3 (rat)

SECTION 4 – FIRST AID MEASURES

EYE: Thorough rinsing for 15 – 20 minutes of the effected eye with water is recommended. If discomfort or irritation persist, consult a physician.

Skin Problem: Discontinue use of product. Wash affected area with soap and water. Apply a cold compress to affected areas to relieve any discomfort. If discomfort persist, consult a physician.

Inhalation: If respiratory irritation occurs, remove individual to fresh air.

Ingestion: Accidental ingestion of product may necessitate medical attention. In case of accidental ingestion dilute with fluids (water or milk) and treat symptomatically. Do Not induce vomiting.

Note: After first aid treatment, the individual should be advised that a hospital emergency room or family physician should be consulted if anything unusual occurs or appears necessary in the judgment of the individual, and that the subsequent management of the accident should be dictated by persistent symptoms and under the direction of a physician.

SECTION 5- FIRE FIGHTING MEASURES

Flash Point: Flash point applies only to liquids and not applicable to aerosols. See section 13 for disposal information and section 14 for transport information.

Extinguishing Media: Use chemical foam, dry chemical, carbon dioxide or water.

Explosion Hazard: Flammable. Containers may rocket or explode in heat or fire. Explosive mixtures may form with air if large quantities of product are released in unventilated areas.

Fire Fighting Instructions: Contact emergency personnel. Contents under pressure. Containers may rocket or explode in heat or fire. Use self- contained breathing apparatus and full protective gear, if large quantities of product are involved. Hazardous decomposition products may be released. Thermal degradation may produce oxides of carbon and/or derivatives. Thermal degradation may also produce oxides of silicone.

SECTION 6- ACCIDENTAL RELEASE MEASURES

Procedures for Spill/Leak Clean-up.

For Household Settings: Ventilate area and eliminate all ignition sources. Absorb liquid and scrub the area with detergent.

For Non-Household Settings: Ventilate area and eliminate all ignition sources. Use safety glasses or goggles if splash hazard exist; use gloves and other protective clothing (apron boots etc.) to prevent skin contact

SECTION 8 – HANDLING AND STORAGE

Precautions for safe handling:

For Household settings: Do not expose to heat and or flames. Use only in ventilated areas. Avoid smoking during use. Contents under pressure. Do not puncture or incinerate container or store at temperature above 120 degrees F ( 50 degrees C). Keep out of reach of children.

For Non-household Settings: Avoid heat, sparks, flame, or smoking during use. Do not crush, puncture or incinerate. Avoid extreme heat and ignition sources. Store at room temperature. Avoid spraying towards open flame. Avoid puncturing or otherwise damaging aerosol containers and packaging when using forklifts or other material handling equipment.

___________________________________________________________________________________

Conditions for Safe Storage:

For Household Settings: Pressurized contained. Protect from sunlight and do not expose to temperatures exceeding 120 degrees F.

For Non-Household Settings: Pressurized contained. Protect from sunlight and do not expose to temperatures exceeding 120 degrees F (50 degrees C.). Keep from extreme cold. Store in accordance with local requirements for Aerosol Level 2. Store in well ventilated, cool area.

SECTION 8 – EXPOSURE CONTROLS, PERSONAL PROTECTION

For Household Settings: This product is safe for consumers and other users under normal and reasonable foreseeable use.

For Non-household Settings: Use in well ventilated areas. Use safety glasses or goggles if airborne mist hazards exist; use gloves and other protective clothing to prevent skin contact. Always follow good hygienic work practices. Avoid prolonged contact with skin and clothing. This product is safe for consumers and other users under normal and reasonably foreseen use.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

Color, odor and Appearance: A light amber to white liquid with characteristic odor.

Melting Point: Not applicable.

Physical State: Liquid.

Boiling Point: Not Applicable.

pH: 8.4 – 9.4

Solubility in water:

Concentrate = Soluble.

Propellant = Negligible.

Flashpoint: Not applicable to aerosols.

% VOC: Complies with Federal and State regulations for VOC content.

Vapor Density: 0.86 g/ml

Specific Gravity: 0.95 – 0.97

SECTION 10 – STABILITY AND REACTIVITY

Conditions to Avoid: Avoid extreme heat and ignition sources. Store away from oxidizers.

Other Recommendations: None

SECTION 11 – TOXICOLOGICAL INFORMATION

This product is safe for consumers and others users under intended and reasonably foreseeable use. Additional information on toxicological endpoints is available from the supplier upon request.

Chronic Effects: Finished product is not expected to have chronic health effects.

Target Organs: No adverse health effects on target organs expected for finished product.

Carcinogenicity: Finished product is not expected to be carcinogenic.

NTP: No IARC: No OSHA: No

SECTION 12 – ECOLOGICAL INFORMATION

The product ingredients are expected to be safe for the environment at concentrations predicted under normal use and accidental spill scenarios. Packaging components are compatible with the conventional solid waste management practices. Additional information is available from supplier on request.

SECTION 13 – DISPOSAL CONSIDERATIONS

Disposal should be in accordance with Federal, State/Provincial and Local regulations.

For Household Settings: The following instructions are for consumer usage only. Empty can through normal use as instructed on can, before disposing. If the can cannot be emptied due to malfunction of the nozzle, the product should be disposed of in a special waste collection for pressurized containers. A local waste handler should be contracted for additional information.

For Non-Household Settings: Products covered by this MSDS, in their original form, when disposed as waste, are ignitable hazardous waste, D001, according to Federal RCRA regulations (40 CFR 261). Disposal should be in accordance with local, state and federal regulations. Aerosol cans, when disposed as waste are regulated as D003 reactive hazardous waste in some States because of their potential to explode when heated. Check with your State environmental agency for guidance.

California Waste Code: 331

SECTION 14 – TRANSPORT INFORMATION

Finished packaged product transported by ground (DOT): UN1950, Aerosols, Flammable, Class 2.1, Ltd Qty. May be shipped as Consumer Commodity ORM-D (US).

Finished packaged product transported by vessel (IMDG): UN1950, Aerosols, Flammable, Class 2.1, Ltd Qty.

Finished packaged product transported by Air (IATA): UN1950, Aerosols, Flammable, Class 2.1, Ltd Qty.

SECTION 15 – ADDITIONAL REGULATORY INFORMATION

US Federal

The product described in this Material Safety Data Sheet is regulated under Federal law and is safe as per directions on container, box or accompanying literature (where applicable).

CERCLA reportable quantity (RQ):

Ingredient

CAS#

Level

RQ

RCRA Hazardous Waste No. D001/Unlisted

Hazardous Waste Characteristic Of Ignitability

(Dimethyl Ether)

115-10-6

70 – 85%

100 lbs.

Canada

All ingredients are CEPA approved for import to Canada. This Product has been classified in accordance with the hazard criteria of the Canadian Controlled Products Regulations (CPR) and this NSDS contains all information required by the CPR.

US States

CA Prop 65:

This product is not subject to warning labeling under California Proposition 65.

State Right-to Know:

The following ingredients are present in the finished product and are listed on the following state right-to-know list:

Ingredient

CAS#

Level

State

Dimethyl Ether

115-10-6

70 – 85%

IL

MA

NJ

PA

RI

Other

Perfumes contained within the finished products covered by this MSDS comply with appropriate IFRA guidance.