Brush-on MSDS


MATERIAL SAFTY DATA SHEET CLEARNEON BRUSH-ON POLYURETHANE

SECTION 1 – CHEMICAL SUBSTANCE/PRODUCT AND COMPANY

IDENTIFICATION

Product Name:

ClearNeon Brush-on Polyurethane

Company Identification:

ClearNeon Inc.

7337 W. 33rd Street North

Wichita, KS 67212

1-316-722-5825

In case of medical emergencies, please contact your local poison control center.

Transportation emergency (24 hour), contact:

Dan Dopps – Phone # 1-316-393-7691 (US)

Date: January 2002 Updated: 2012

SECTION 2 – COMPOSITION AND INGREDIENTS

Complete ingredient list is:

Water, Acrylates Copolymer, Propylene glycol, Fragrance.

Hazardous Ingredients as defined by OSHA, 29 CFR 1910.1200 and/or WHMIS under the HPA:

Chemical Name

CAS No.

Composition Range

LD50/LC50

Water

7732-18-5

55 – 70 %

LD50 = No data available

LC50 = No data available

Ammonium salt of modified acrylic copolymers

25 – 40 %

LD50 = No data available

LC50 = No data available

Propylene Glycol

25322-69-4

0.6 – 1.2 %

LD50 = No data available

LC50 = No data available

SECTION 3 – HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW:

This product is safe for consumers and others users under intended and reasonably foreseeable use.

Wear protective clothing.

Wear full face shield if splash hazard exist.

Use in ventilated area.

Additional information on toxicological endpoints is available from the supplier upon request.

POTENTIAL HEALTH EFFECTS:

EYE:

Contact may cause mild, transient irritation. Some redness and/or stinging may occur.

SKIN:

Not expected to be irritating, sensitizing, photoallergenic or phototoxic when used as intended. Avoid prolonged and/or repeated contact with skin. If irritation occurs following use, it is expected to be mild and transient.

INHALATION:

May cause mild, transient respiratory irritation. Avoid prolonged contact to concentrated vapors.

INGESTION:

Product used as intended is not expected to cause gastrointestinal irritation. Accidental ingestion of undiluted product may cause mild gastrointestinal irritation with nausea, vomiting, and diarrhea.

SECTION 4 – FIRST AID MEASURES

EYE: Thorough rinsing for 15 – 20 minutes of the effected eye with water is recommended. If discomfort or irritation persist, consult a physician.

Skin Problem: Discontinue use of product. Remove contaminated clothing. Wash affected area with soap and water. Apply a cold compress to affected areas to relieve any discomfort. If discomfort persist, consult a physician.

Inhalation: If respiratory irritation occurs, remove individual to fresh air.

Ingestion: Accidental ingestion of product may necessitate medical attention. In case of accidental ingestion dilute with fluids (water or milk) and treat symptomatically. Do Not induce vomiting.

Note: After first aid treatment, the individual should be advised that a hospital emergency room or family physician should be consulted, and that the subsequent management of the accident should be dictated under the direction of a physician.

SECTION 5- FIRE FIGHTING MEASURES

Flash Point:

>100 degrees C

Extinguishing Media:

Use chemical foam, dry chemical, or water.

Protective equipment for fire-fighting:

Fire fighters should wear self-contained breathing apparatus and protective gear.

Fire Fighting Instructions:

Contact emergency personnel.

Fire Hazards:

Harmful vapors.

SECTION 6- ACCIDENTAL RELEASE MEASURES

Procedures for Spill/Leak Clean-up.

For Household Settings: Wear protective clothing. Absorb liquid and scrub the area with detergent.

For Non-Household Settings: Use safety glasses or goggles if splash hazard exist; use gloves and other protective clothing (apron boots etc.) to prevent skin contact. Pick up with absorbent material and dispose of in accordance with regulations.

Environmental precautions: Do not discharge into drains/surface water/ground water.

SECTION 8 – HANDLING AND STORAGE

Precautions for safe handling:

For Household settings: Follow label instructions. Keep out of reach of children.

For Non-household Settings: Avoid puncturing or otherwise damaging containers and packaging when using forklifts or other material handling equipment.

___________________________________________________________________________________

Conditions for Safe Storage:

For Household Settings: Avoid extreme heat and cold. Store at room temperature. Keep out of reach of children. Keep container tightly closed.

For Non-Household Settings: Avoid extreme heat and cold. Store at room temperature.

SECTION 8 – EXPOSURE CONTROLS, PERSONAL PROTECTION

For Household Settings: This product is safe for consumers and other users under normal and reasonable foreseeable use. Respiratory protection not required. Wear protective clothing and protective eye ware.

For Non-household Settings: Use safety glasses or goggles if airborne mist hazards exist; use gloves and other protective clothing to prevent skin contact. Always follow good hygienic work practices. Avoid prolonged contact with skin and clothing. This product is safe for consumers and other users under normal and reasonably foreseen use.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

Color, odor and Appearance: A light amber to white liquid with characteristic odor.

Melting Point: Not applicable.

Physical State: Liquid.

Boiling Point: 100 degrees C

pH: 7.6 – 8.2

Solubility in water: Dispersible

Freezing point: 0 degree C

% VOC: Complies with Federal and State regulations for VOC content.

Vapor Density: Not applicable

Specific Gravity: 0.95 – 0.97

SECTION 10 – STABILITY AND REACTIVITY

Conditions to Avoid: No conditions to avoid.

Substances to avoid: No substances to avoid.

Hazardous Reactions: No hazardous reactions.

Other Recommendations: None

SECTION 11 – TOXICOLOGICAL INFORMATION

This product is safe for consumers and others users under intended and reasonably foreseeable use. Additional information on toxicological endpoints is available from the supplier upon request.

Chronic Effects: Finished product is not expected to have chronic health effects.

Target Organs: No adverse health effects on target organs expected for finished product.

Carcinogenicity: Finished product is not expected to be carcinogenic.

NTP: No IARC: No OSHA: No

SECTION 12 – ECOLOGICAL INFORMATION

The product ingredients are expected to be safe for the environment at concentrations predicted under normal use and accidental spill scenarios. Packaging components are compatible with the conventional solid waste management practices. Additional information is available from supplier on request.

SECTION 13 – DISPOSAL CONSIDERATIONS

Disposal should be in accordance with Federal, State/Provincial and Local regulations.

For Household Settings: Dispose of in accordance with national, state and local regulations.

For Non-Household Settings: Products covered by this MSDS, in their original form, when disposed as waste, Check with your State environmental agency for guidance.

SECTION 14 – TRANSPORT INFORMATION

Finished packaged product transported by ground: (DOT): Not classified as a dangerous good under transport regulations.

Finished packaged product transported by vessel (IMDG): Not classified as a dangerous good under transport regulations.

Finished packaged product transported by Air (IATA): Not classified as a dangerous good under transport regulations.

SECTION 15 – ADDITIONAL REGULATORY INFORMATION

US Federal

The product described in this Material Safety Data Sheet is regulated under Federal law and is safe as per directions on container, box or accompanying literature (where applicable).

Regulation status: TSCA, US released/listed

OSHA hazardous category: Chronic target organ effects reported, ACGIH TLV established.

CERCLA reportable quantity (RQ):

Ingredient

CAS#

Level

RQ

Ammonium Hydroxide

1336-21-6

25 – 40 %

1000 lbs.

SARA Hazard Categories (EPCRA 311/312): Acute, Chronic

Canada

This Product has been classified in accordance with the hazard criteria of the Canadian Controlled Products Regulations (CPR) and this MSDS contains all information required by the CPR.

US States

State RTK

State Right-to Know:

The following ingredients are present in the finished product and are listed on the following state right-to-know list:

Ingredient

CAS#

Level

State

Ammonium salt of modified copolymers

25 – 40 %

MA

NJ

PA

Other

Perfumes contained within the finished products covered by this MSDS comply with appropriate IFRA guidance.

SECTION 16 – OTHER INFORMATION

DISCLAIMER: This MSDS is intended to provide a brief summary of our knowledge and guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and accurate to the best of ClearNeon Inc.’s knowledge. It is not meant to be an all-inclusive document on worldwide hazard communication regulations.

This information is offered in good faith. Each user of this product needs to evaluate the conditions of use and design the appropriate protective mechanisms to prevent personal exposures, property damage or release to the environment. ClearNeon Inc. assumes no responsibility for injury to the user or third persons, for any damage to property resulting from the use or misuse of the product.